loading
reading
writing
saving
searching
Shop Clean Out Parts & Project Cars, Prices vary - $2,500 (Cordova)
QR Code Link to This Post
I have a rolling dirt late model chassis. It has quick change rear, aluminum wide 5 wheels, power rack and pinion steering, tach gages, etc. $1000
I Have an early Chevy II (65-67) 5 lug 10 bolt non posi rearend, $100.
I have Chevy rally wheels 14" and 15" $30 each. I have some Mopar Police rally wheels $30 each. If they are in sets of 4, I will not separate.
I have turbo 350 and 400 trans cores for rebuilding $100 each
I have some 66 Satellite parts, have disc brake spindles and rotors $125. I have a steering column for a floor shift car, $100. I have some body parts.
I have a set of wire wheels and 18" tires from a Shay A Model replica. They are 4 lug and fit pinto suspension. $200 for 4
I have 10 new old stock motorcycle tires. They have been stored indoors. 16", 17", 18", 19", some are street tires some are dirt bike $100 for all 10 or $15 each.
I have some factory FOMOCO double pumper 4 barrel carbs from the 60s. These will need rebuilt. $50 each.
I have a 1954 Dodge Royal coupe, rolling body. Has no drive train. It's a project car. It's an older custom, shaved door handles, white roll pleat seats, tow bar on front. Has all the glass in it. Has some rocker panel rust. $1000
I have a pair of 331 Chrysler hemi heads, rockers, and valve covers. casting number 1486833-1. I have 2 pairs of exhaust manifolds and plug wire covers,$400 for all
I have a set of Moroso chrome valve covers for a 351 Cleveland, $100.
I have a set of Chevy double hump heads with 2.02 valves. $150 They have pressed in studs
I have a rat rod/hot rod project. It's a 30/31 Model A Ford. It started out as a coupe which has been modified to an extra cab truck. It's on a model A frame with an early chevy rearend with ladder bars, has straight axle front. It steers and rolls. It currently has a Buick nail head motor setting in it. DOES NOT RUN! Sold As Is. $2200
All items Sold As Is. Call or text show contact info