loading
reading
writing
saving
searching
CNC Machinists (Direct Hire) – Up to $35/hr (Birmingham)
compensation:
$25–$35/hr range depending on experience
employment type:
full-time
job title:
CNC Machinist
QR Code Link to This Post
Click here to apply:
https://app.laborup.com?eventType=CLICK&attributionType=AD&attributionId=CRAIGSLIST&targetId=WEB&variant=a8ef9d
This is not a production shop. Most of the work is one-off or small batch, supporting aerospace, defense, space, and custom machine builds. If you’re used to solving problems at the machine and owning your work, this will feel very different than a typical role.
What You’ll Be Doing:
Set up and run large 3-axis CNC mills (double column / heavy plate work)
Take parts from raw material to finished — setup, run, troubleshoot, inspect
Read prints and edit G/M code at the control (FANUC)
Build workholding (magnets, fixtures) and handle large material (cranes/forklifts)
Hold tolerances from ±.005 down to ±.0002
Troubleshoot issues in real time and adjust accordingly
Who They’re Looking For:
Junior Machinists
~3+ years in machining (job shop preferred)
Can handle setups and inspect your own work
Comfortable making offsets / basic edits at the machine
Senior Machinists
~7+ years in a true job shop environment
Experience with large, complex parts
Strong with G-code/M-code edits at the control
Confident with GD&T and tight tolerance work
Pay:
Most hires will fall in the $25–$35/hr range depending on experience
2nd Shift: +$4/hr differential
Schedule:
1st Shift: Mon–Fri, 6:00am – 2:30pm
2nd Shift: Mon–Thurs, 2:30pm – 1:00am
Benefits:
Health, Dental, Vision
401(k) + company match + profit sharing
PTO
Paid parental leave
Click here to apply:
https://app.laborup.com?eventType=CLICK&attributionType=AD&attributionId=CRAIGSLIST&targetId=WEB&variant=a8ef9d
- Principals only. Recruiters, please don't contact this job poster.